Tips to Make Your Mehndi Design Darker

Must read

Mehndi is a traditional form of temporary body art. This is widely used in South Asian and Middle Eastern cultures. Mehndi designs can be simple or intricate. The colour of the henna paste can range from light orange to deep burgundy. Mehndi designs vary based on the occasions like a wedding or festivals. 

For instance, the mehndi design for your wedding can be more intricate and detailed as you like want. Meanwhile, for a festival, the design can be minimal or can be a different style. But irrespective of the occasion, you need to make your mehndi look darker. Because the mehndi design looks elegant when it’s darker.

If you want to make your mehndi design darker, there are several tips you can follow to help achieve that. In this blog, we will discuss some tips to make your mehndi design darker for your wedding. 

Use Fresh Henna Powder

The quality of the henna powder leaves an impact on the colour of your mehndi design for your wedding. Make sure to use fresh, high-quality henna powder that has been stored in an airtight container. On the other hand, you can buy henna powder a few days before your wedding to have a good impact. This will ensure that the henna paste has a strong colour and will result in a darker mehndi design.

Make Your Henna Paste

Another effective way to make your mehndi design darker is to make your henna paste from scratch. This will allow you to control the quality of the henna powder and other ingredients that go into the paste. To make the paste, mix henna powder with lemon juice, tea, and sugar. Leave the paste to sit for 6-8 hours before use. This will allow the dye to release and reach its full potential. And you can make your mehndi design darker by using this paste. 

Keep the Henna on for Longer

The longer you leave the henna paste on, the darker the colour will be. Try to keep the henna paste on for at least 3-4 hours, or even overnight. Make sure to wrap the henna-covered area with plastic wrap or cloth to prevent it from drying. You can also keep the mehndi design wet by spraying water. But remember to spray a small amount of water to avoid mess. If you spray too much water, then the paste will melt and run down your hand. 

Apply a Second Coat of Henna

Applying a second coat of henna paste on top of the first one can help make the mehndi design darker. Make sure to wait for the first coat to dry completely before applying the second one. This will help the second coat to adhere better and result in a darker colour on your wedding

Use Essential Oils

Essential oils such as eucalyptus, tea tree, and clove oil can help to make the mehndi design darker. Simply add a few drops of these oils to the henna paste before applying it to the skin. The oils will help to open up the pores and allow the henna dye to penetrate deeper into the skin.

Avoid Water and Sweat

After applying the henna paste, make sure to avoid water and sweating for at least 24 hours. This will allow the henna dye to fully develop. Touching the mehndi design or getting it wet can cause the colour to fade and result in a lighter format.

Apply Heat

Applying heat to the mehndi design can also help to make it darker. Use a hairdryer, a hot towel, or a heated pad to warm the henna-covered area gently. The heat will help to activate the henna dye and result in a darker colour. 

Wait for the Henna to Oxidize

Finally, it is important to wait for the henna to oxidise. This means that you should wait at least 12-24 hours after removing the henna paste. You need to do this before assessing the final colour of the mehndi design. The colour will continue to darken and reach its maximum potential as it oxidizes.

These are several effective tips to make your mehndi design darker. From using fresh henna powder and making your henna paste to applying heat and waiting, you should have patience. After all, its your wedding day and you have to be the centre of attention.

- Advertisement -spot_img

More articles

- Advertisement -spot_img

Latest article